The self-sealing magnetic oil suction filter can be directly installed on the side, upper or bottom of the oil tank.
The self-sealing magnetic oil suction filter can be directly installed on the side, upper or bottom of the oil tank. The oil suction cylinder penetrates below the liquid level in the oil tank. Transmitter and other devices, so that the oil in the oil tank will not flow out when the filter element is replaced and cleaned.
However, in order to avoid the phenomenon of cavitation in the pump, it is necessary to pay full attention to the pressure loss, and generally use 100-200 mesh thick metal mesh or notch wire material. Therefore, it is not a filter that controls the dirt concentration of the system.
1. The oil filter is easy to install and connect, simplifying the system pipeline;
2. Set up a self-sealing valve to make it convenient to replace, clean the filter element or maintain the system;
3. It has filter element pollution transmitter and oil bypass valve, which improves the reliability of hydraulic system.
1. Metallurgy: used for the filtration of the hydraulic system of rolling mills and continuous casting machines and the filtration of various lubrication equipment.
2. Petrochemical: separation and recovery of products and intermediate products in the process of oil refining and chemical production, and particle removal and filtration of oilfield well injection water.
3. Textile: Purification and uniform filtration of polyester melt in the process of drawing, protection and filtration of air compressors, and degreasing and dehydration of compressed gas.
Self-sealing magnetic suction filter
Similar ProductsVIEW MORE >