FAX-1000×10 Liming Hydraulic Filter element

Product overview

FAX-1000×10 Liming hydraulic filter This series of high pressure oil filter is installed in the hydraulic system of the oil circuit used to remove the hydraulic system components wear metal powder and other mechanical impurities to keep the oil circuit clean, prolong the life of the hydraulic system. The low pressure filter element is also provided with a by-pass valve. When the filter element is not replaced in time, the by-pass valve can be opened automatically to ensure the normal operation of the system. This series of products is the replacement of similar products in the United States, Germany, Britain, Italy and other countries.

Technical parameter

1. Pressure difference of filter element: 21MPa

2. Working temperature: -10 ~ +100℃

3. Filtration accuracy: 5 ~ 20μm

4. Working medium: general hydraulic oil.

5. The filter layer is made of stainless steel microfiber sintered felt, which has high strength, high temperature resistance and corrosion resistance, large contaminant capacity, good filtration performance, and can be repeatedly cleaned and used.

Experimental standard

ISO2941 filter element cracking test

ISO2942 filter element structural integrity test

ISO2943 filter element material and fluid compatibility test

End load test of ISO3723 filter element

ISO3724 filter element flow fatigue test

ISO4572 has been tested for many times

ISO3968 filter element differential pressure characteristic test

ISO3968 flow-pressure differential characteristic test

Test oil viscosity 3 * 10-5 m2/

Test oil specific gravity 0.86Kg/dm3

Product characteristics