Product
OF7S10P1M1B10E  oil filter
OF7S10P1M1B10E  oil filter
OF7S10P1M1B10E  oil filter
OF7S10P1M1B10E  oil filter

OF7S10P1M1B10E oil filter

Hydac oil filter is a hand-pushed refueling trolley. Hydac oil filter is converted from German Hydac oil filter by Aite environmental protection manufacturer. This hydraulic oil filter inherits various advantages of Hydac oil filter and is more convenient in use.

  • Material:Q235,304,316

Product Overview

Hydac oil filter is a hand-pushed refueling trolley. Hydac oil filter is converted from German Hydac oil filter by Aite environmental protection manufacturer. This hydraulic oil filter inherits various advantages of Hydac oil filter and is more convenient in use. This portable hydraulic device can be used for equipment maintenance and filtration of oil and oil filling and emptyof hydraulic equipment. OFU Hydac filter adopts large size filter element, large filter area ensures filtration efficiency and filter element service life. The high performance gear pump ensures the stability of suction, and reduces the impact on the filter element while ensuring the large flow rate, extending the service life of the filter element and even the whole equipment. The filter element of OFU10 oil filter is 1300R series and 2600R series. Replace the filter element should first cut off the power supply, close the inlet and outlet ball valve. Remove the top cover by turning the handle counterclockwise. Pull out the old filter element. Insert the new filter element, press the small red column, and tighten the top cover clockwise. Loosen the exhaust wire plug and start the system. Tighten the exhaust wire plug after the gas is discharged.

Performance Characteristics

1. The pump cannot be reversed when the oil filter is started, so as not to blow out the shaft seal of the oil suction pump and cause air inhalation;

2. Open the exhaust valve in time during the suction process of the oil filter, and close the exhaust valve in time after draining the air;

3. In the process of oil suction, the sound of the pump becomes louder. If the oil suction is not smooth, please consider whether the coarse filter before the pump is blocked.

4. When the oil filter is applied to a certain extent, the filter element inside will accumulate pollution, the pressure difference increases, and the filtration capacity decreases. When the pressure difference reaches 035Mpa, the filter element needs to be replaced.

Technical parameters

Flow specification: 100L/min

Sealing material: P butadiene rubber V fluorine rubber

Working voltage: 380V-50HZ

Filter material: B-BN P-paper

Filtration accuracy: 5-40μm

Pollution indicator: B- Standard visual D- Automatic will stop automatically

Motor power: 3KW 4KW

Scope of application

1, metallurgy: used for rolling machine, continuous casting machine hydraulic system filtration and filtration of various lubrication equipment.

2. Petrochemical: separation and recovery of products and intermediate products in the process of refining and chemical production, and particle removal filtration of oilfield injection water and natural gas.

3, textile: polyester melt in the process of drawing purification and uniform filtration, air compressor protection filtration, compressed gas removal of oil and water.

4, electronics and pharmaceutical: reverse osmosis water, deionized water treatment filtration, washing liquid and glucose pretreatment filtration.

Product Features


Similar ProductsVIEW MORE >

Online message

We will contact you within 24 hours

GET GUIDANCE
Copyright © Aite(Henan) environmental protection equipment Co.

icon_online

icon_email

Contact Us

icon_wehtapp Contact Us