The FRP quartz sand filter uses quartz sand as the filter medium.
The FRP quartz sand filter uses quartz sand as the filter medium. Under the corresponding pressure, the water with high turbidity is filtered through the granular or non-granular quartz sand of the corresponding thickness, and the suspended solids and colloids in the water are well intercepted and removed. Particles, microorganisms, and some heavy metal ions, etc., make water clarification water treatment equipment. According to different water production, it needs to be equipped with different mesh numbers (quartz sand particles of different diameters), which are mainly used for water treatment to remove turbidity and pre-treatment of pure water, etc. The turbidity of the effluent can reach below 3 degrees.
FRP quartz sand filter material can be made of FRP, carbon steel anti-corrosion or rubber-lined, all stainless steel. There are two modes of operation: automatic and manual. The automatic control is controlled by pneumatic and hydraulic valves, which is easy to operate and easy to maintain. It is widely used in pre-treatment devices of water treatment processes in all walks of life. The size of the quartz sand filter is mainly determined according to the daily processing volume of the user. The selection of materials is determined according to the user's equipment cost and application. The quartz sand filter device can determine the mid-term and recoil procedures of the recoil according to the water quality of the raw water to be treated. It can adopt automatic timing recoil or manual recoil. After the multi-media filter has been backflushed, its filtration efficiency will be restored.
FRP quartz sand filter is mainly used for water treatment to remove turbidity, and can also be used for surface water, groundwater and so on. It can remove suspended solids, colloid, sediment, etc. in water well.
FRP Quartz Sand Filter
Similar ProductsVIEW MORE >