Oil return filter UT319F32AS20HBNBBR24DC

Product introduction

Oil return filter UT319F32AS20HBNBBR24DC

1. The oil return filter has high porosity and excellent permeability, less pressure loss and large flow rate;

2. Large capacity of filter, high filtration accuracy, long replacement cycle;

3. Excellent temperature and corrosion resistance, long-term use at 480℃, corrosion resistance to nitric acid, alkali, organic solvents, drugs;

4. Can be broken wave, to increase the filter area, and welding processing

5. High strength, even if the liquid strong scour, strong vibration, fiber does not fall off

Technical parameter

Glass fiber filter element filtration accuracy: 3, 5, 10, 20um

Metal mesh filter element accuracy: 25, 50/100/200um

Flow direction: The oil inlet and outlet is on the same side in front of the filter, the oil inlet is above, and the oil outlet is below

Operating temperature: -10-110℃

Use medium: mineral oil, lubricating oil

Pressure difference: 0.6MPa

Performance characteristics

(1). The filter material is made of patented fiber (domestic fiber and imported fiber) and resin through special technology. With a fixed void structure, filter material does not fall off. The intercepted pollution particles will not produce ldquo due to pressure difference and flow pulsation. Discharge rdquo; Phenomenon.

(2) Adopt the gradual aperture structure from the surface to the inside and gradually shrink along the direction of flow. Intercept pollution particles of different sizes in layers. Achieve deep scale. Thus greatly improve the service life.

(3) The support strengthened by spiral winding is adopted to ensure the stability of the filter material. UT319A2408ZANBNYR85 Replacement pall Filter, manufacturer direct, Quality assurance test standards:

Traffic mdash; Differential pressure characteristics are tested according to ISO 3968

Filter differential pressure characteristics according to ISO 3968

Filter filter characteristics according to ISO 457

Filter element compatibility verification according to ISO 2943

Filter element structural integrity according to ISO 2943

Filtration resistance to breakage is verified according to ISO 2941

Product details