HH8314 Low Pressure Filter

Product introduction

The HH8314 Low Pressure Filter is installed on the top of the oil tank, and the filter element can be replaced without stopping. It is suitable for the return oil fine filtration of the hydraulic system that works continuously. It is used to filter out the metal produced by the wear of various components in the hydraulic system. Powder and rubber impurities of seals, etc., keep the oil flowing back to the tank clean, so as to facilitate the oil circulation in the system.

When the HH8314 Low Pressure Filter is blocked and the pressure difference between the inlet and the outlet is 0.35mpa, the transmitter sends a signal. At this time, the reversing valve is turned to make the spare fuel tank work, and then the blocked filter element is replaced.

When the blocked filter element cannot be replaced in time for some reason, and the pressure difference between the inlet and outlet further rises to 0.4mpa, the bypass valve will automatically start to work, thereby protecting the filter element and the normal operation of the system. The single user should replace the filter element as soon as possible.

Technical parameter

Model: HH8314

Pressure: 28bar

Material: carbon steel

Filter Media: Oil

Product advantages

(1) The filtration precision should meet the predetermined requirements;

(2) Sufficient flow capacity can be maintained for a long time;

(3) The filter element has sufficient strength and is not damaged by the action of hydraulic pressure;

(4) The filter element has good anti-corrosion performance and can work for a long time at the specified temperature;

(5) The filter element is easy to clean or replace.

Product Detail