PFC8314-50 replaces two stage filtration of Pall oil filter

Product introduction

PFC8314U Series mobile oil purifier treats fuel resistant and turbine oil by removing water, pollutants and gases. It can be a fixed or mobile device, and is easy and economical to use. By slowing oil oxidation, maintaining lubricity and reducing air mixing improves system reliability and extends the life of system components and oils. Corrosion in the oil system can also be controlled by reducing acid formation. Acid is formed by the interaction of water with metal particles produced in the system.

Product performance

The PALL HNP021 Series oil purifier removes 100% free water and up to 80% dissolved water. It also removes 100% of free gases and up to 80% of dissolved gases. Particle removal is achieved by treating the oil with a 3 micron "Ultipor III" filter with a high beta ratio (beta 3≥1000) before it is returned to the system tank. For more critical uses, a 1 micron (β1≥1000) filter element is available.

Technical specification

Net weight :220kg

Dimensions: Length 1060mm

The width is 620mm

High trolley installation: 885mm

Platform installation: 843mm

Inlet connection: 1 "BSP

Egress connection: 1 "BSP

Circulation flow: 20L/min

Total motor power: 2.05kW

Application of oils: synthetic hydraulic oils with petroleum-based oils and those specified for use with fluoro rubber seals or ethylene propylene rubber seals.

Viscosity :700cSt

Temperature range :10℃ to 70℃

Maximum inlet pressure :0.4bar

Maximum outlet pressure :7barg

Normal working vacuum :-0.7~-0.9bar

Water removal :PALL oil conditioning Purifier removes all free water, free gas, dissolved water (up to 80%) and dissolved air (up to 80%)

Detailed presentation