PFC8314u-100 Poul oil filter oil filter truck

Product introduction

Pall oil filter is our company according to the development requirements of the domestic market, the introduction of foreign advanced production technology, production of a high imitation replacement products. The production of high imitation pall Pall filter truck is not only a domestic trend, but also the domestic hydraulic pressure oil filtration system has made outstanding contributions. The use of new environmental protection filter element, can be in a variety of occasions, a variety of liquid solid particle filtration. The portable oil filter complies with the development of hydraulic technology. The filter material is made of fiber and resin by special process, and has a fixed process structure. The intercepted pollutants will not cause discharge phenomenon because of the fluctuation of flow rate and pressure difference.

Performance characteristics

Lock the differential pressure alarm to prevent false alarm during cold start.

Avoid filter element blocking system flow.

Motor phase out of phase protection.

Pressure difference alarm prompts to replace filter element.

Oil inlet coarse filter protects oil pump.

Outlet diffuser to prevent air from mixing into the tank.

The universal wheel makes the movement more flexible and light.

Oil collecting trays and tubing fixtures reduce environmental pollution.

The oil pump relief valve can be temporarily unloaded in case of misoperation.

Matters needing attention

1. Before switching on the power supply each time, confirm whether the power supply voltage is consistent with the requirements of the machine.

2. After the power is connected, the power indicator lights up normally, and the alarm indicator (differential pressure, phase sequence) and buzzer do not work; If no, follow the steps in the Troubleshooting section to rectify the fault.

3. Before starting, open the inlet and outlet ball valve.

4. After starting, if abnormal vibration and noise are found, please handle according to the steps in the Troubleshooting section.

5. After the machine is used for a period of time, if the oil seal wear exceeds the design standard, oil leakage will occur at the end of the oil pump shaft. Timely replacement of the sealing ring.

Product characteristics