OFU10P1N2B05B replacement oil filter

Product introduction

The OFU10P1N2B05B Import Replacement oil filter is a hand-pushed portable oil filter that can be used for equipment maintenance and oil filling and draining of hydraulic equipment. Using large size filter element, large filter area to ensure filtration efficiency and filter element service life. High performance gear pump to ensure the stability of suction, in order to ensure large flow while slowing the impact on the filter element, extend the service life of the filter element and even the whole equipment. OFU10P1N2B05B imported replacement HYDAC oil filter element is 1300R series and 2600R series filter element. Replace the filter element should first cut off the power supply, close the oil inlet and outlet ball valve. Remove the top cover by turning the handle counterclockwise. Pull out the old filter element. Insert the new filter element, press the small red column, and tighten the top cover clockwise. Loosen the exhaust wire plug and start the system. Tighten the exhaust wire plug when the gas is discharged.

Technical parameter

1. Gross weight: 130kg

2.Pump flow: 100L/min

3. Working pressure: 16bar

4.Filtration accuracy: 5μm

5.Viscosity range: 16-1000㎡/2

6. Inlet and outlet oil pipe: 2.5m

7.Accessories: flowmeter, with pressure head or threaded joint hose

8.Filter material: imported glass fiber

9. Filter element: Hedek 1300R filter element, 2600R filter element

10. Sealing material: butadiene rubber

11. Motor power: 3kw

12.Voltage: 380V

Performance characteristics

Compact structure, light weight, small volume, stable operation, low noise, easy to use and maintenance. Widely used, can be used as oil filter, can also be used as oil pump to transport oil. The filter element adopts composite filter material, the initial resistance is small, the circulation area is large, and the long time is not blocked. Users can also according to the need, replace with different precision filter element, in order to meet the requirements of use.