In the hydraulic system, the G01938Q Parker filter element is mainly used to filter out the solid particles and colloidal substances in the working medium and control the pollution degree of the working medium.
In the hydraulic system, the G01938Q Parker filter element is mainly used to filter out the solid particles and colloidal substances in the working medium and control the pollution degree of the working medium.
1. Filtration precision: 1-100μm
2. Working pressure: 21Mpa
3. Working medium: general hydraulic oil, phosphate ester hydraulic oil, emulsion, water-glycol, etc.
4. Working temperature: -30℃-110℃
5. Filter material: glass fiber filter material
6. Structural strength: 1.0Mpa, 2.0Mpa, 16.0Mpa, 21.0Mpa
7. Filtration ratio: X≧100
1. The steel plate is used for one-time forming, and the oil-resistant rubber sealing ring is used to ensure sufficient mechanical strength and good sealing performance.
2. Using extrusion production technology, it can retain the components of screw steel and increase the supporting force.
3. The 360° roll-in automatic equipment for one-time molding ensures that the bite is fully buckled, improves the overall strength, and has strong cold-start pressure resistance and leak-proof ability.
4. Single tank design, firm structure, no deformation and no rupture.
5. The perforated pipe adopts spiral joint design, which has a large flow area and compressive strength. All through holes are facing the filter element, so that one side of the filter material is smooth without burrs, so as to avoid the abrasion of the folded end of the filter paper and protect the filter paper from deformation.
6. The use of multi-density filter material with smooth and round fibers can prevent more pollutants and reduce flow resistance, which satisfies the oil filter cleanliness, sufficient oil flux and sufficient pressure bearing capacity to ensure Not deformed.
G01938Q PARKER hydraulic oil filter element
Similar ProductsVIEW MORE >