LY pressure plate frame type oil filter

Product characteristics

Transformer oil impurity filtration, small plate frame type oil filter is composed of filter bed, oil pump and other parts of the mobile device. Filter transformer oil, capacitor oil and various insulating materials oil to remove moisture and impurities and improve the compressive strength of the oil.

1, using filter paper as filter material, high filtration accuracy, can absorb a small amount of water in the oil, the replacement of filter paper is convenient and quick.

2, simple structure, convenient movement, easy operation, low running cost.

3, can work continuously, processing efficiency is high, fast, suitable for oil containing more impurities

4, a wide range of uses, most of the viscosity is not high oil products can carry out high precision filtration treatment.

5, independent box type filter system, effectively increase the filter area, suitable for oil containing miscellaneous quality.

Structural feature

1. LY pressure plate frame type oil filter is a mobile device composed of filter bed, oil pump and coarse filter.

2, the filter bed can be operated continuously, under the action of pressure to the side filter into the dirty oil, filter by a complete set of alternate arrangement of filter plate and filter frame .

3, and including a manual screw pressing device and pressing plate mechanism. The side of the filter plate and the filter frame are supported on the supporting plate of the frame, and the filter paper (or cloth) is lined between the filter plate and the filter frame as the medium to filter. The corresponding position of the filter plate and filter frame is provided with two liquid holes, when pressed into two complete channels, the triangular side of the ear into the dirty oil, filtered by the filter chamber, from the other corresponding channel (in the ear fan-shaped side of the clean oil.

4. When filtering, the dirty oil is distributed to each filter frame through the input channel, and the impurities are filtered out on the filter plate through the filter paper, and collected in the output channel and discharged out of the machine. While the dirt remains on the surface of the filter paper, a small amount of water in the dirty oil is absorbed by the capillary of the filter paper. When the filter slag on the surface of the filter paper gradually thickens and the water content in the filter paper increases, the filtration resistance increases. When the increase reaches a certain level (generally 0.2-0.35Mpa), the filtration should be stopped and the filter paper should be replaced and continued to be used.

5, gear pump and motor with elastic rubber pad connection, in order to avoid high pressure caused by mechanical accidents, the lower part of the oil pump is provided with a  valve (the product has been adjusted to the specified high pressure value when leaving the factory) according to user needs can be adjusted valve force on the lower value, but not allowed to adjust to exceed the specified high pressure value.

6. The oil pump and motor are installed under the filter part, and the liquid output of the oil pump is transmitted to the filter part through the discharge pipe and the thrust plate.

7. The gear of the oil pump is supported by a rolling bearing, which is lubricated by the oil delivered by the oil pump itself. The fine filter is installed in the suction end of the oil pump, and its function is to prevent large particles of impurities from entering the oil pump and damaging the oil pump. Remove the cover of the coarse filter, you can directly remove the filter screen cleaning, because if the coarse filter is covered with dirt, not only make the oil filter capacity rapidly decreased, but also may damage the filter screen.

8. When there is oil in the box, the oil return valve can be opened to absorb the oil and prevent the oil from overflowing and leaking outside the machine.

Product use

Transformer oil impurity filtration, small plate frame type oil filter can effectively remove industrial oil, machinery oil in a large number of impurities and a small amount of water, also used for oil depot (including factory oil depot) and related factory enterprises to filter transformer oil, capacitor oil and various insulating material oil, remove the water and impurities, improve the pressure strength of the oil. For gasoline, kerosene and other non-lubricity oil, according to user needs can choose special materials and special motor can also be used. When there is too much oil and water, the oil should be heated first to evaporate part of the water and then filtered. If the oil contains a lot of water, it can be used with the vacuum oil filter produced by our company to achieve the purpose of dehydration and deemulsification.

Product details