Horizontal water seal drainer

Product introduction

When the gas is transported in the pipeline, part of the saturated steam and mechanical water will be separated. It will adversely affect the use of gas transmission, gas pipeline facilities and users. The horizontal water seal drain is aimed at the problem of easy gas leakage, and provides a breakdown-proof and leak-free gas drain.

Structure type

1. The horizontal water seal drainer consists of a horizontal pipe and two vertical short pipes to form a "U"-shaped water seal. Both ends of the horizontal pipe are blocked with steel plates. There is a support at the bottom of the horizontal pipe, which can be connected with the steel bracket. Install.

2. The horizontal water seal drainer uses the height of the water seal to overcome the gas pressure, thereby sealing the gas and cutting off the gas to discharge the condensed water. This product is installed on the overhead gas pipeline to remove condensed water in the gas pipeline.

Advantages

1. It can realize continuous drainage.

2. It can prevent gas leakage very well.

3. Has good breakdown resistance.

4. It has the ability to release pressure for security.

5. It is easy to clean up the ash and sludge entering the drain.

6. Low failure rate and high reliability.

7. The operation is simple and the maintenance workload is small.

8. Simple structure, no moving parts.

9. It is convenient to observe the operation status of the drain.

10. Low manufacturing, operation and maintenance costs.

Use the steps

1. Close all valves and inspection cocks (or valves) on the connecting pipe;

2. Open the water supply valve and add water to the drain;

3. After the overflow outlet discharges water, close the water supply valve;

4. Check for water seepage everywhere. When there is water seepage, deal with it in time;

5. After confirming that it is normal, slowly open the valve on the connecting pipe from top to bottom. At the beginning, more water was discharged from the drain outlet, and gradually returned to normal;

6. Check that there is no gas leakage on each valve, cock and joint surface, and confirm that the drainer is working properly;

7. There is no abnormal sound inside the drainer.

Product Details