Brush self-cleaning filter

Product description

The brush type self-cleaning filter is equipped with multiple filtering and cleaning devices. When the water enters into each filter cartridge from the water inlet of the filter, the impurities are trapped on the inner wall of the filter cartridge, and the filtered clean water flows out from the water outlet. When the impurities on the inner wall accumulate more and more, the pressure difference between the inlet and outlet reaches the preset value or when the cleaning time or manual prefabrication is reached, the filter will start the self-cleaning process.

Working principle

The whole self-cleaning process consists of two steps: open the automatic drain valve on the self-cleaning filter; the motor drives the cleaning system in the filter screen of the self-cleaning filter, and the impurities trapped by the filter screen are discharged from the drain valve. During cleaning, the system flows continuously, and the entire operation process of the self-cleaning filter is controlled by an intelligent control box equipped with it. The control mode can choose differential pressure, time, manual and PLC control.

Technical parameter

Single water treatment capacity: 30-5000m³/h

Working pressure: 0.1-1.6Mpa

Pressure loss: ≤0.018Mpa

Working temperature: 95℃

Filtration accuracy range: 100-3000µm

Water required for self-cleaning: <1%

Self-cleaning time: 10-60 seconds

Self-cleaning control mode: differential pressure, time and manual

Electronic control mode: AC three-phase 380V/50Hz

Control interface: digital display, knob, switch

Filter type: 316L woven mesh, wedge mesh

Scope of application

Cooling water filtration, protection sprinkler, sewage treatment, municipal water reuse, workshop water, RO system pre-filtration, irrigation filtration applications, groundwater, municipal water, rivers, lakes, seawater, orchards, nurseries, greenhouses, golf courses, parks.

Product Details