Sullair oil and gas filter element 250034-086

Product characteristics

Sullair  oil and gas filter 250034-086, also known as Shouli oil and gas separator, is composed of two parts: tank and oil core. The oil and gas mixture from the main engine, passing through the oil and gas separator, first hits the simplified wall, reducing the flow rate and forming large oil droplets. After the oil and gas separator filter element, for fine separation, the residual in the compressed air to separate out a small amount of lubricating oil.

Due to the weight of the oil droplets themselves, they mostly settle to the bottom of the filter element of the oil and gas separator. Then through the two return tubing, back to the main engine air inlet, suction working chamber. Therefore, the Shuli oil and gas separator plays the role of primary separator and oil storage tank.

Technical parameter

Part name: Shouli oil and gas separator

Accessories Use: separation of oil and gas mixture

Part type: 250034-086

Overall size: 25*25*45cm

Accessories weight: 4.31kg

Accessories brand: SULLAIR/ Shouli USA

Applicable model: Shouli air compressor P750/825/900/ series

Product characteristics

1. Upper cyclone structure, high pre-separation effect;

2. Humanized top turntable design;

3. Large volume oil and gas separation system, the interior is specially designed, multi-stage separation structure, separation effect is good;

4. Low voltage drop design, reduce at least 1% power loss;

5. Up to 8000 hours of maintenance cycle, much higher than other brands in the market, reduce your comprehensive maintenance costs.

6. Super filtration precision, exhaust oil content is less than 2PPM, reduce the loss of lubricating oil, reduce the comprehensive maintenance cost.

Product use

The oil and gas mixture enters the separator tank, hits the curved surface, the velocity is greatly reduced, the flow direction changes, and the formation of large oil droplets, most of which fall into the bottom of the tank due to their heavier weight. The rest of the oil flow is separated from the filter element and deposited at the bottom of the filter element. Two return oil pipes are drawn from the bottom of the filter element and connected with the compressor inlet; Due to the pressure difference, the oil accumulated at the bottom of the separating filter element flows back to the compressor inlet.

Product details