250034-112 Air compressor oil & gas separators

Product introduction

The filter material of 250034-112 oil mist separator adopts imported ultrafine glass fiber. The gas mist in the compressed air can be completely filtered through the filter element of the oil mist separator.

Technical parameter

1. Qil content of compressed air: 3~6PPm, Oil-gas granule of compressed air: < 0.1 pm

2. Service life of the filter element: 3500~5200h (greatly affected by the

quality of the lubricating oil and the working environment)

3. Applicable compressor type: screw compressor

4. Properties: alkali resistance, high temperature resistance, acid resistance

5. External diameter: 200 mm

6. Height: 175 mm

Use attention

1. Initial PSID (Pounds per Square Inch Differential): <0.02Mpa

2. Lubricating oil should be controlled at prescribed position, which is commonly at 1/2~2/3 of the Oil Mist Separator/oil sight glass.

3. Secondary oil return pipe and one way valve should be kept unimpeded and in the prescribed position.

4. Exhaust steam pressure should be adjusted to the prescribed value.

5. Make sure the air compressor works at proper temperature and the pressure valve is in good condition.