88290006-013 Air filter element for air compressor

Product introduction

The air filter element of Shouli air compressor can filter the dust in the compressed air. It has the characteristics of high dust efficiency, simple installation, easy use and easy maintenance. Material imported from the United States composite long fiber spunbonded polyester non-woven fabric production. It has the advantages of high filtration precision, good waterproof and oil proof performance, small resistance, large handling air volume, good stiffness, not easy to deformation, washable, long service life, etc. Filter materials: filter paper, high efficiency felt using high quality wood pulp fiber filter paper, high strength polyester fiber non-woven fabrics and other filter materials suitable for various industrial production dust removal system needs. Applied to: painting equipment, industrial dust removal, central air conditioning duct cleaning, powder spraying, sand blasting operation, pigment industry, wood processing filtration, etc. Accuracy up to 0.3 micron! Filtration efficiency 99.96%! Imported long fiber polyester filter material, fiber interleaved, uniform distribution. Good wear resistance, better than the traditional filter material can withstand the pulse back blowing airflow, filter material stiffness is good, and can be repeatedly cleaned. End cover, center frame are electric galvanized parts, do not rust.

Technical parameter

1. Filtration accuracy :5micro; m~10micro; m

2. Filtration efficiency 98%

3. The service life can reach about 2000h

4. The filter material is made of pure wood pulp filter paper from HV and Ahlstrom

Performance characteristics

ISO2941 filter element cracking test

ISO2942 filter element structural integrity test

ISO2943 filter element material and fluid compatibility test

End load test of ISO3723 filter element

ISO3724 filter element flow fatigue test

ISO4572 has been tested for many times

ISO3968 filter element differential pressure characteristic test

ISO3968 flow-pressure differential characteristic test

Working principle

1. The lubricating oil surface in the oil and gas separator barrel should be controlled in the specified position, usually 1/2~2/3 of the oil speculum.

2. The secondary return tubing and check valve shall be kept unobstructed and in the specified position.

3. Adjust the exhaust pressure to the specified value.

4. The operating temperature and pressure of the compressor are normal.

Product details