The lubricating oil filter is composed of a primary filter, oil pump and filter device. The primary strainer is a tube of metal mesh that prevents larger solid particles from entering the oil pump. The oil pump is usually a gear pump, which transmits impure oil into the filter.
The lubricating oil filter is composed of a primary filter, oil pump and filter device. The primary strainer is a tube of metal mesh that prevents larger solid particles from entering the oil pump. The oil pump is usually a gear pump, which transmits impure oil into the filter.
1, strong ability to filter impurities, large area, deep precision filter material can remove fine particles in the oil.
2, automatic backwash function: automatic cleaning filter retained a large number of impurities.
3. Advanced medium endothermic condensation system.
4. The lubricating oil filter is equipped with pressure protection, automatic temperature control and heating, automatic separation of condensate water device, and drainage in line operation. The operation is simple and reliable.
5, the use of high quality filter material, large amount of pollution, corrosion resistance, high temperature resistance, high mechanical strength, high precision in addition to impurities, long service life.
6, unique degassing, dehydration system: the use of three-dimensional evaporation technology, multi-level oil and water separation technology, rapid separation of water, gas and impurities in the oil.
When the oil filter works, the polluted oil enters the heater through the inlet under the action of vacuum suction at external atmospheric pressure. The heated oil enters the primary filter, the large particle impurities are filtered out, and then the oil enters the vacuum separator and flows through the special diverging device. The diverging device produces a large surface area per unit volume of oil and exposes the contaminated oil to an atmosphere with very low relative humidity, thereby removing water, air and gases from the oil. The mixture of evaporating water steam and gas condenses into liquid through the water tank and cooler, and then enters the water storage tank together. The remaining gas is vacuumed out. Remove the moisture of the oil by the discharge pump input fine filter to remove particulate impurities, that is, to purify the oil, to complete a purification process, according to the amount of water content, must be repeated to completely remove the water.
Lubricating oil vacuum oil filter mainly deals with unqualified mechanical oil, hydraulic oil, compressor oil, freezing oil and other industrial oil, can quickly and effectively remove the water, gas, impurities and volatile matter in the oil (such as alcohol, gasoline, ammonia, etc.), restore the viscosity of the oil, flash point and performance. The treated lubricating oil has low emulsification value, little water content and high accuracy of impurities. It can be used repeatedly in high precision hydraulic lubrication equipment at home and abroad. Suitable for petroleum, chemical, mining, metallurgy, electric power, transportation, machinery manufacturing, railway and other industries of all kinds of lubrication purification and regeneration treatment.
Aite environmental lubricating oil filter
Similar ProductsVIEW MORE >
Export01@aiteeps.com
+0086-13015535452
