ALL large flow water filter element integrated molding, no cement, no falling off, high cleanliness, cloth set surface, deep, coarse filter in one, can effectively filter suspended matter, particles, rust and other impurities in the fluid.
PALL large flow water filter element integrated molding, without any cement, no fall off, high cleanliness, cloth set surface, deep, coarse filter in one, can effectively filter suspended solids, particles, rust and other impurities in the fluid. Filtering principle: The filter element is installed in the large flow filter, the liquid flowing into the filter from the inlet, through the vertical arrangement of the foldable large area polypropylene filter element, the impurities in the fluid are adsorbed on the surface of the filter element, clean liquid flows out of the space inside the filter element, and then flows into the system from the outlet of the filter, to ensure the cleanliness of the system fluid, can effectively prevent pollution, no fall off, Avoid faults and prolong the service life of the filter element.
Initial pressure difference: 0.02MPa
Replacement pressure drop: 2.4Bar
* Maximum allowable pressure drop: 3.5Bar
* High operating temperature: 80℃
Filter direction: from inside out
Accuracy levels: 1μm, 5μm, 10μm, 20μm, 40μm, 70μm, 100μm
Filter material: polypropylene glass fiber
Sealing material: ethylene propylene rubber, nitrile butadiene rubber, fluorine rubber, neoprene rubber
Od: 6 inches (152.5mm)
Length: 60 inches (1524mm)
1. The combination of surface filtration and deep filtration can make the single passing amount up to 70m3/h. Compared with the ordinary filter element, the number of filter elements can be greatly reduced, and the supporting shell size can be significantly reduced. In the process of use to reduce the number of filter element replacement and unnecessary loss, improve the work efficiency.
2. Folding design, increase the filter area, so that the pressure drop is significantly lower than the ordinary filter element.
3. Large diameter design, increase the amount of pollution, prolong the service life, reduce the production cost.
4. The number of filter elements needed to be replaced is greatly reduced, saving labor costs.
5. Convenient handle design significantly reduces the time of replacing the filter element, making the replacement of the filter element simple and portable.
6. A variety of filtering accuracy, to meet the requirements of different accuracy levels.
7. Overall polypropylene design and hot melt bonding treatment, effectively prevent secondary pollution.
8. Equipped with a skeleton to enhance the pressure resistance of the filter element during use.
9. The design of sealed interface reduces the risk of side-flow and ensures the tightness and reliability of filtration.
1. Ultrafiltration equipment RO security filtration desalination pretreatment
2. Filtration of condensed water in power plant
3. Water filtration in biopharmaceutical industry
4. Petrochemicals of paint coatings
5. Microelectronic film fiber resin
Pall large flow water filter element is complete in size
Similar ProductsVIEW MORE >