HFU660GF100H13 large flow filter

Brief Introduction

HFU660GF100H13 large flow filter installed in the security filter, also known as: Folding filter element, large flow filter element, security filter element, large area fold surface design can lower pressure than other filter element, large flux security filter single core flux - up to 70m3/h, compared with the ordinary filter element, can greatly reduce the number of filter element use, and significantly reduce the size of the supporting shell, so the initial investment cost is greatly reduced than the ordinary filter system.

Performance Characteristics

1. The flow rate of a single filter element is large, and the flow rate of one filter element can reach 110m³/H;

2. Low installation cost and operation cost;

3. Small number of filter element replacement;

4. The flow direction from inside to outside ensures that all impurities are intercepted in the filter element;

5. No metal frame, reduce the loss caused by discarding;

6. U-shaped sealing groove ensures high filtration efficiency.

Technical parameters

Od: 6 "(152mm)

Length: 20 "(525mm) / 40" (1020mm) / 60 "(1524mm)

Filtration accuracy :1, 4.5, 6, 10, 20, 40, 70, 100μm

O-ring sealing material: EPDM (ethylene-propylene rubber), NBR (butadiene rubber)

Operating conditions

Operating temperature: Folding polypropylene: 82 ℃; Melt-blown polypropylene: 65 ℃

Pressure drop: Folded polypropylene: 3.4bar; Melt-blown polypropylene: 1.03bar

Recommended pressure drop for filter element replacement: 2.4bar, 20C

Recommendation Filter water flow:

20 "long filter element: 660LPM;

40 "long filter element: 1,300LPM;

60 "long filter core: 1,900LPM

Product Features