The 6211472350 air filter element produced is installed at the air inlet of the air compressor. It is used to filter the dust, sand, water and oil mist in the air source, so as to ensure the cleanliness of the air source, and improve the service life of the oil and gas separation filter element, oil filter element and lubricating oil, so as to ensure the safe and efficient operation of the air compressor.
Our company is a professional manufacturer of air compressor filter element. The 6211472350 air filter element produced is installed at the air inlet of the air compressor. It is used to filter the dust, sand, water and oil mist in the air source, so as to ensure the cleanliness of the air source, and improve the service life of the oil and gas separation filter element, oil filter element and lubricating oil, so as to ensure the safe and efficient operation of the air compressor.
Accuracy of technical parameters: 0.1&μm
Filtration efficiency: 99.99%
Initial pressure difference: ≤0.02Mpa
Service life: 3500-5200h
Oil content: 3-6PPm
1. Atlas oil and gas separation core is a flange hole group positioning installation oil and gas separation core
2. Oil and gas separation element is the key component that determines the compressed air quality of air compressor
3. The compressed air from the air compressor entrails large and small oil droplets. Large oil droplets are easy to separate through the oil and gas separator, while small oil droplets (suspended oil particles) must be filtered through the micron-grade glass fiber filter material layer of the oil and gas separator.
The oil and gas separator adopts the most advanced anticorrosive and efficient microfiber condensed material as the main filtration body. The filter bed of the filter element of the system is composed of the pre-filtration layer, microfiber layer, support layer, filtration layer and gravity settling layer
1. In the process of using the oil and gas separator, the normal pressure difference of the newly installed oil and gas separator is between 0.17 and 0.3bar, and it is abnormal if it exceeds 0.3bar.
2. In the process of using oil and gas separator, when the pressure difference is greater than 0.8bar, it is abnormal. At this time, it is necessary to check the air compressor air system, check whether the air filter can filter 5-6um magazines to reach 95% or more, and reach 99.8% of impurities in 7-10um. Otherwise, the oil and gas separator core will have a pressure difference of more than 0.8bar in advance in use.
If the core pressure difference of the oil and gas separator is greater than 1bar during use, replace the core of the oil and gas separator.
6211472350 Air Filter
Similar ProductsVIEW MORE >
Export01@aiteeps.com
+0086-13015535452
