This type of oil filter adopts oil-water separation filter, without heating, dehydrated oil can meet national standards. Due to no heating, it ensures that the additives in the oil do not crack and deteriorate.
Mechanical impurities in oil can be filtered and purified to the national standard; Trolley design, easy to use, suitable for high water content of light fuel (light diesel, gasoline, kerosene, etc.).
1) This type of oil filter adopts oil-water separation filter, which does not need heating, and the dehydrated oil can meet the national standard.
2) Because it is not heated, it ensures that the additives in the oil do not crack and deteriorate.
3) Simple operation, can automatically run online and release water, do not need to be guarded.
4) Low operation cost, 50% lower than the cost of vacuum oil filter, centrifugal separation, plate and frame pressure filter.
5) This type of equipment has standard type and explosion-proof type.
● Turbine oil and transformer oil purification;
● Hydraulic lubrication system oil removal and removal of impurities filter;
● Access hydraulic lubrication system, improve the cleanliness of the system.
The unqualified oil first enters the primary filter, and the large particles of impurities are intercepted. The oil which removes the large particles of impurities is transported to the fine filter by the oil pump. After the small impurities are removed in the fine filter, it continues to enter the coalesce separator. The dissolved water in the oil, free water, quickly break the oil film out of the oil molecules and precipitate; At this point, dehydration is completed to remove impurities, so as to achieve the required moisture and cleanliness requirements.
LYC-150J coalescing and separating oil filter
Similar ProductsVIEW MORE >