Coalescing dewatering oil filter is to solve the problem of excessive water content in various oils, using "coalescence separation" dehydration technology, developed HO series coalescing dewatering oil filter.
Coalescing dewatering oil filter is to solve the problem of excessive water content in various oils, using "coalescence separation" dehydration technology, developed HO series coalescing dewatering oil filter.
The unqualified oil first enters the primary filtration, and the large particles of impurities are retained. The oil that removes the large particles of impurities is transported to the fine filter by the oil pump. After the small impurities are removed in the fine filter, it continues to enter the coalescing separator. In it, the principle of molecular separation technology is used to analyze the oil under pressure, to avoid the intermolecular binding force, so that the dissolved water and free water in the oil can quickly break the oil film to separate from the oil molecules and precipitate; Moisture and cleanliness requirements.
1. This type of oil purifier adopts oil-water separation filter without heating, and the dehydrated oil can meet the national standard.
2. Since there is no heating, it is guaranteed that the additives in the oil will not crack and deteriorate.
3. The operation is simple, it can automatically run and release water online, and no need to be guarded.
4. Low operating cost, 50% lower cost than vacuum oil filter, centrifugal separation, plate and frame pressure filter.
5. This type of equipment has standard type and explosion-proof type.
1. Purification of turbine oil and transformer oil;
2. Water removal and impurity filtration of hydraulic lubrication system oil;
3. Access the hydraulic lubrication system to improve the cleanliness of the system.
LYC-150J coalescing separation oil filter
Similar ProductsVIEW MORE >