Product
Coalescence dehydration oil filter LYC-50J
Coalescence dehydration oil filter LYC-50J
Coalescence dehydration oil filter LYC-50J
Coalescence dehydration oil filter LYC-50J
Coalescence dehydration oil filter LYC-50J
Coalescence dehydration oil filter LYC-50J

Coalescence dehydration oil filter LYC-50J

Coalescence dehydration oil filter LYC-50J is particularly difficult for traditional filtration and separation equipment to separate one liquid from another liquid mixed with each other.

  • Rated pressure: 0.6MPa
  • Voltage: AC 380V three-phase

Product introduction

Coalescence dehydration oil filter LYC-50J is particularly difficult for traditional filtration and separation equipment to separate one liquid from another liquid mixed with each other. The coalescence dehydration oil filter developed by Aite Environmental Protection Company can remove the Particulate impurities and emulsified water, free water in the oil without damaging the quality of the original product.

Technical parameter

Rated flow: 50L/min

Rated pressure: 0.6MPa

Use temperature: 25-80℃

Original pressure loss: ≤0.1MPa

Filter precision before pump: 100μm

Voltage V: AC 380V three-phase

Motor power: 1.1kw

Performance characteristics

1. Coalescence dehydration oil filter LYC-50J applies "coalescence separation" technology for dehydration, with high dehydration efficiency and strong capacity.

2. The imported filter material is used as the filter medium, and the large filter area design can filter out very fine particles and impurities, so that the oil can reach a high degree of cleanliness.

3. The coalescing system consists of a set of coalescing filter elements. After passing through the filter element, the free water and emulsified water in the oil are coalesced into larger water droplets, and then settle into the water storage tank by gravity.

4. The separation filter element of the separation system is made of hydrophobic material. When the oil passes through the filter element, the water droplets are blocked on the outer surface of the filter element and coalesce with each other until they settle into the water storage tank due to the action of gravity.

5. The separated water is stored in the water storage tank. When the interface height reaches the set value, open the valve to discharge the water until it drops to the lower liquid level, close the valve and stop the drainage.

Application field

1. Purification of turbine oil and transformer oil;

2. Water removal and impurity filtration of hydraulic lubrication system oil;

3. Access the hydraulic lubrication system to improve the cleanliness of the system.

Product Details

Coalescence dehydration oil filter LYC-50J

email

aiteepcom@163.com

whatsapp

+ 0086-13015535452

Similar ProductsVIEW MORE >

  • Anti-fuel coalescence dehydration oil filter machine

    Anti-fuel coalescence dehydration oil filter machine

  • TYB series light lubricating oil coalescence separation type oil filter

    TYB series light lubricating oil coalescence separation type oil filter

  • Coalescence dehydration oil filter LYC-400J

    Coalescence dehydration oil filter LYC-400J

  • Coalescence dehydration oil filter LYC-100J

    Coalescence dehydration oil filter LYC-100J

  • Online message

    We will contact you within 24 hours

    GET GUIDANCE
    Copyright © Aite(Henan) environmental protection equipment Co.

    icon_online

    icon_email

    Contact Us

    icon_wehtapp Contact Us