The coalescence dehydration oil filter LYC-100J is divided into five stages of filtration. The oil first passes through the oil absorption filter and the pre-filter.
The coalescence dehydration oil filter LYC-100J is divided into five stages of filtration. The oil first passes through the oil absorption filter and the pre-filter. After filtering out some large particles of impurities, the mixed oil enters the coalescence separation tank, and the oil first passes through the coalescence separation tank. Coalescing filter and coalescing filter element are made of hydrophilic materials. Due to the different speed of oil and water passing through the filter layer, tiny water droplets are adsorbed on the surface of the filter layer and converge into water droplets, which settle under the action of gravity and are initially separated from the oil. Part of the small molecule water continues to move forward and flows through the separation filter. The separation filter is made of hydrophobic material. The oil can pass through the filter layer, while the water is trapped outside the filter layer. The water further settles and gathers into the liquid accumulation tank; Separating the filter, the oil that has been dehydrated is further removed by the secondary fine filter element, and finally a clean oil after dehydration and removal of impurities is formed for subsequent equipment use.
1. Particle filtration system
The large filter area design can well filter out very fine particles and impurities, so that the oil can reach a high degree of cleanliness.
2. Coalescing system
The coalescing system is composed of a set of coalescing filter elements. After passing through the filter element, the free water and emulsified water in the oil are coalesced into larger water droplets, and then rely on gravity.
Settled into the water storage tank under the action.
3. Separation system
The separation filter element of the separation system is made of hydrophobic material. When the oil passes through the filter element, the water droplets are blocked on the outer surface of the filter element and coalesce with each other until they settle into the water storage tank due to the action of gravity.
4. Drainage system
The separated water is stored in the water storage tank. When the interface height reaches the set value, the valve is opened to discharge the water until it drops to the lower liquid level, and the valve is closed to stop the drainage.
1. Purification of turbine oil and transformer oil;
2. Water removal and impurity filtration of hydraulic lubrication system oil;
3. Access the hydraulic lubrication system to improve the cleanliness of the system.
Coalescence dehydration oil filter LYC-100J
Similar ProductsVIEW MORE >
Export01@aiteeps.com
+0086-13015535452
