Explosion-proof coalescing dehydration oil filter

Product Details

The explosion-proof coalescing dewatering oil filter uses the "coalescence separation" technology for dehydration, with high dehydration efficiency and strong capacity, especially for the separation of a large amount of water in the oil. All oil-water emulsification structure in the medium; through the filtration of the particle filtration system, the cleanliness of the medium can be stably controlled in the state required by the system to ensure the cleanliness of the oil; the explosion-proof coalescing dehydration oil filter does not change the oil. Physical and chemical properties, prolong the service life of oil; low operating cost; excellent system configuration, strong continuous working performance, suitable for online operation.

Technical parameter

Model: LYC-J series

Rated flow: 25-400L/min

Operating temperature: 25-80°C

Recommended viscosity: 10-120Cst

Rated pressure: 0.6Mpa

Original pressure loss: ≤0.01Mpa

Coarse filtration precision: 100μm

Voltage: AC380V three-phase

Motor power: 0.75-13KW

Features

1. The explosion-proof coalescing dehydration oil purifier adopts imported filter material as the filter medium, and the large filter area design can filter out extremely fine particles and impurities, so that the oil can reach a high degree of cleanliness.

2. The coalescing system consists of a set of coalescing filter elements. The coalescing filter element adopts a polar molecular structure. After passing through the filter element, the free water and emulsified water in the oil are coalesced into larger water droplets, and then rely on the action of gravity. subside into the water storage.

3. The separation filter element of the separation system is made of hydrophobic material. When the oil passes through the filter element, the water droplets are blocked on the outer surface of the filter element and coalesce with each other until they settle into the water storage tank due to the action of gravity.

4. The separated water is stored in the water storage tank. When the interface height reaches the set value, open the valve to discharge the water until it drops to the lower liquid level, close the valve and stop the drainage.

Product Details