OF5F10P6N2B05 oil filter

Product introduction

The OF5 seriesof Hydac Lubricant fine oil filter is designed to remove impurities and moisture and improve the performance of the oil. For the oil with higher viscosity, it can also be filtered by heating to reduce its viscosity, which has a good purification effect, not only saves cost, but also protects the environment. It is an ideal oil-saving recovery equipment. Especially suitable for large imported equipment lubrication cooling system purification, can ensure the normal operation of equipment, prolong the expensive imported oil replacement cycle.

Instructions for use

Before use, it should first check the arrangement according to the working diagram of the filter and the working principle of the filter bed. Three pieces of filter paper should be put in front of the stop plate and after the pressing plate to prevent the oil pressure from blowing. Two pieces of filter paper should be put between each filter plate and the filter frame (or another filter cloth can be arranged according to the user's needs), and must be placed according to the working principle of the filter bed and the working diagram of the filter machine. Do not put the wrong direction and position. The long ear of the pressing plate is on one side, and the short ear is on the other side, and all the frame of the pressing plate is placed in the same direction. The pressing plate is taken as the standard. All the long ears are on the same side as the long ear of the pressing plate, and all the short ears are on the same side as the pressing plate. Before driving, you can use your hand to turn the motor wheel and repeat whether it is flexible. If there is no jamming phenomenon, you can start the machine formally. The motor shaft rotation direction is consistent with the direction indicated by the arrow on the oil pump cover. If the filter can absorb and discharge oil for filtration within a few seconds after normal startup, if no oil is produced after half a minute, it indicates that the suction end of the oil pump is blocked or leaking, or the float oil drift valve is leaking. The fault should be removed before starting the car. (Note: In the case of the first startup or no oil in the buoy, the buoy should be appropriately added with oil).

Application field

Is mainly used to make lubricating oil and other oil rehabilitation function, reduce production costs, protect machinery!

Whether production line, large production equipment, engineering machinery, mechanical equipment and so on are generally used in oil can buy oil filter, petrochemical, metallurgical machinery, ships and mines, aviation medicine, steel, building materials, railways, power plants, electricity and so on.

Oil filter is the industrial green environmental protection umbrella! Oil filter mainly deals with unqualified mechanical oil, hydraulic oil, compressor oil, freezing oil, insulation oil, turbine oil, cooking oil and other industrial oils.

Then reliable removal of unqualified oil moisture, impurities, gases and other harmful substances, agile rehabilitation oil function to oil standards.

It also has the functions of pumping oil, filling oil, vacuum drying, hot oil circulation filtration, etc., to satisfy the application requirements of shopping malls.

Product characteristics