Product
OF5F10P6N2B05 HYDAC oil filter
OF5F10P6N2B05 HYDAC oil filter
OF5F10P6N2B05 HYDAC oil filter
OF5F10P6N2B05 HYDAC oil filter
OF5F10P6N2B05 HYDAC oil filter
OF5F10P6N2B05 HYDAC oil filter

OF5F10P6N2B05 HYDAC oil filter

OF5F10P6N2B05 HYDAC oil filter is used to remove impurities and moisture in oil and improve various properties of oil.

  • Material: Stainless steel
  • Brand:HYDAC

Product description

OF5F10P6N2B05 HYDAC oil filter is used to remove impurities and moisture in oil and improve various properties of oil. For oil with higher viscosity, it can also be filtered by heating to reduce its viscosity, which has a good purification effect, saves costs, and protects the environment. It is an ideal oil-saving recovery equipment.

Instructions for use

Before use, check and refer to the working diagram of the oil filter and the working principle of the filter bed. Place three pieces of filter paper in front of the stop plate and behind the compression plate to prevent the oil from being broken by strong oil pressure. Two filter papers are placed between the boxes (or additional filter cloths can be provided according to the user's needs), which should be placed according to the working principle of the filter bed and the working diagram of the filter machine, and cannot be placed in the wrong direction and position. The long ears of the compression plate are on one side and the short ears are on the other side, and all the plate frames are placed in the same direction. Taking the compression plate as the standard, all the long ears are on the same side as the long ears of the compression plate, and all the short ears are on the same side as the compression plate. On the same side of the short ear, press gold filter paper after installation, ready to filter. Before driving, you can turn the motor wheel by hand, and try repeatedly to see if it is flexible. If there is no stuck phenomenon, it can be officially turned on. The rotation direction of the motor shaft is consistent with the direction indicated by the arrow on the oil pump cover. oil filter

If the oil can be absorbed and discharged for filtering within a few seconds after the normal startup, if no oil appears after half a minute, it means that the suction end of the oil pump is blocked or leaks, or the float oil float valve is leaking.

Application field

1. Metallurgy: used for the filtration of the hydraulic system of rolling mills and continuous casting machines and the filtration of various lubrication equipment.

2. Petrochemical: separation and recovery of products and intermediate products in the process of oil refining and chemical production, and particle removal and filtration of oilfield well injection water.

3. Textile: Purification and uniform filtration of polyester melt in the process of drawing, and protection and filtration of air compressors.

Product Details

OF5F10P6N2B05 HYDAC oil filter

email

aiteepcom@163.com

whatsapp

+ 0086-13015535452

Similar ProductsVIEW MORE >

  • OF5F10P6N2B05 oil filter

    OF5F10P6N2B05 oil filter

  • Online message

    We will contact you within 24 hours

    GET GUIDANCE
    Copyright © Aite(Henan) environmental protection equipment Co.

    icon_online

    icon_email

    Contact Us

    icon_wehtapp Contact Us