Why should we observe the concentration of exhaust filtration at the outlet of the cartridge dust collector regularly?

Why should we observe the concentration of exhaust filtration at the outlet of the cartridge dust collector regularly?

Any dust removal equipment will cause problems if used for a long time and will wear out over time. Cartridge dusters are no exception.

When using the cartridge dust collector, the exhaust concentration of the exhaust port should be observed regularly. If there is flue gas discharge, it is necessary to check the damage of the filter cylinder and the sealing degree of the filter cylinder in time. The lower part of the cartridge is clean due to insufficient compressed air or pressure. The dust in the lower part of the filter cylinder is thicker, which reduces the dust removal efficiency of the whole filter cylinder. Clean the bottom of the cartridge. The installation of nozzles has produced a large amount of air. However, due to the installation of the nozzle, the air surface is basically located in the upper part of the filter cylinder, and the compressed air flow does not need to be diffused, resulting in poor upper cleaning effect.

Technicians should also check regularly. During the operation of the filter, the cleaning system will timely clean the dust attached to the surface of the filter, which will affect the filtering effect of the filter. However, check the cartridge regularly for lumpy dust buildup, steam, or rust. Please be aware of the above problems, which means the cartridge may be damaged or the operation process may be incorrect. Hazard investigation should be carried out in time.

The method to solve this problem: the upper part of the filter drum is provided with a baffle, which is used to change the flow field of the upper part of the filter drum in the process of filtering and cleaning, and improve the cleaning effect of the upper part. Electromagnetic pulse valve is the key component of filter cartridge dust collector. It is known as the "heart" of the cartridge. The performance of the filter directly affects the operation of the dust collector. The diaphragm of the electromagnetic pulse valve is damaged. Close the valve in front of the pulse valve and open the pulse valve for inspection. If the diaphragm is damaged, it needs to be replaced.

The above is the introduction of the whole content of the filter, if you want to know more about the content of the filter, please feel free to contact us for consultation.