What is the reason for the large operating pressure difference of the security filter?

What is the reason for the large operating pressure difference of the security filter?

First, the common reasons for the large operating pressure difference of the security filter are as follows

1. There are a lot of impurities in the filter cylinder of the security filter. This may be due to the accumulation of too much impurities on the surface of the filter element, which will block the filter element or damage it, resulting in a large operating pressure difference of the security filter.

2. The working pressure of the security filter exceeds the specified value, and each equipment can only work within a reasonable range. Once the working pressure exceeds the bearing range of the equipment itself, the pressure difference will be too large.

3. Scaling on the surface of the filter element or tank of the security filter. If the water quality environment is poor, the organic compounds such as calcium carbonate in the sewage are high, long-term filtration but no cleaning, it will directly lead to scaling on the surface of the tank, and also lead to greater filter pressure difference.

4. The pressure gauge of the security filter is damaged. Pressure gauge is generally installed on the top of the filter can cover, if the use of pressure gauge occurs serious damage, it will lead to some deviation. One filter has an excessive differential pressure.

Second, the solution of the large operation difference of the security filter

1. Check the pollution degree of the filter, take out the filter element in time, and clean it. Choose the appropriate cleaning method, light pollution can be physical cleaning method, if it is heavy pollution, you need to add chemicals, using chemical cleaning method soaking cleaning.

2. Check the working pressure of the device and adjust the working pressure to a reasonable range. If the user has a high demand for water production, a security filter with a higher water yield is required.

3. Use measuring equipment to test the pressure gauge. If any damage is found, replace the pressure gauge with a new one immediately.

I hope you can help you after reading the above content about the security filter. If you want to know more about the security filter, please feel free to contact us for consultation.