2. It is also worth noting that the pressure of the automatic self-cleaning filter is reduced. When the pressure of the equipment is reduced, the flow rate will gradually slow down, and the effect of filtration will be reduced. When encountering such a situation, the filter is deliberately reminding us to pay attention to cleaning and maintenance. Filter cleaning, first of all to replace the filter in the outdoor to blow the dust clean, and then use the laundry basin with water immersion, and gently scrub. Secondly, the cleaned filter should also be placed in the vent place to air dry until the filter is cleaned. Then, before installing the filter, check whether there is damage or air leakage in time, and install only after checking that there is no problem.
3. Automatic self-cleaning filter is not suitable for volatile substances and ash, microorganisms, toxic substances, plant nutrients and other water filtration. Water content and solid content of raw filtered water: the sum of solid content and water content is 100, that is, the sludge with high water content has low solid content, and the sludge with low water content has high solid content. The sludge with high solid content belongs to the sludge. The sludge should be concentrated, digested and dehydrated, and the moisture content of the sludge after dehydration will change significantly. The change of water content or solid content can reflect the effect of the treatment process of concentration, digestion and dehydration. Automatic self-cleaning filter is not suitable for water with high solid content.
The above is a small series to introduce the automatic self-cleaning filter in daily use should pay attention to three aspects of the problem, I hope you read, in the future use process can help you!
