How to deal with high concentration of wastewater automatic self-cleaning filter?
The thickness and fine of the automatic self-cleaning filter are made of stainless steel welding mesh, screen plate and screen these components of the internal and external double-layer structure, the automatic filter element is used in the way of automatic cleaning, but also very good to enhance the anti-interference ability, can be used in the environment of poor water quality.
The high concentration of wastewater enters from the inlet, and the impurities in the water precipitate to the stainless steel filter screen, thus producing the corresponding differential pressure. The automatic self-cleaning filter detects the differential pressure change of the inlet and outlet through the differential pressure switch generated. When the pressure difference gets the corresponding value, the electric control of the water supply control valve will send a motor signal indication, cause a series of the following actions, the electric opportunity to automatically drive the brush for a series of rotation, for the automatic filter element scrub, at the same time the control valve will automatically open for blowdown.
For automatic self-cleaning filter after installation, professional staff will carry out detailed debugging, to ensure the normal operation of the machine, will set a detailed filtration time and self-cleaning conversion time, waiting for the treatment of wastewater will be from the water inlet into the equipment, automatic self-cleaning filter can start formal work, When the cleaning time set in advance is reached, the electric controller can give the hydraulic control valve to the motor to send a specific signal, cause the subsequent action, the electric chance to receive the signal to drive the brush to rotate, for the filter element cleaning, in the process of cleaning the blowdown valve will open automatically for blowdown, Under normal circumstances, the whole cleaning process in ten seconds, after the end of the cleaning control valve will automatically close, the electric machine will stop running, the whole automatic filter system will be restored to an initial state, and then enter the next working procedure.
The above is about the full content of how to deal with the high concentration of wastewater automatic self-cleaning filter, if you are not clear can contact us at any time to consult.
