new
Home / News&events / Industry information

The high-performance 3R ultra-precision oil filter is worthy of your favor!

With the rapid development of the hydraulic industry, higher requirements are put forward for the reliability of the hydraulic system. At present, about 70% of the failures in the hydraulic system are caused by oil pollution.

In order to control the pollution degree of the hydraulic system, in addition to installing an oil filter in the hydraulic system, the new oil injected into the system needs to be pre-purified with a 3R ultra-precision oil filter system fluid.

超精密滤油机1

First,Performance characteristics

3R ultra-precision oil filter has the characteristics of lightness and flexibility, convenient movement, simple operation, reliable performance, compact structure, beautiful appearance and convenient maintenance.

超精密滤油机2

Second,Working principle

When the hydraulic system runs for a period of time, impurities, moisture, water-soluble acid and alkali will appear in the oil inside, which will seriously affect the integrity of the system and shorten the service life of the equipment. The 3R precision oil filter can absorb the system oil into the filter barrel. First, the pump Pre-filter, filter out larger particles of solid impurities, and then flow into the secondary and tertiary filtration systems to filter out the moisture and acidic substances inside, to achieve high precision.

超精密滤油机3

Third,Installation and debugging

Since the equipment is mobile, there is no need to design an installation foundation, just move the equipment to the level ground near the oil tank or oil tank to be treated.

Connect the oil inlet and outlet pipes of the equipment to ensure that the oil path from the oil tank to the machine is unobstructed, connect the oil inlet of the equipment, the oil discharge port at the lower part of the oil tank to be treated or the oil tank, and the oil outlet to connect the oil tank or oil tank. Upper fuel filler.

The selection of the power supply line should be able to withstand the large current when the equipment is working normally.

Start the motor, and observe whether the rotation of the motor is clockwise. If it is not clockwise, please change the phases of the power supply.

超精密滤油机4

Fourth,Use and maintenance

When the 3R ultra-precision oil filter is started, the motor cannot be reversed. After confirming that the motor runs clockwise, it can work normally. After the oil filter is used for a period of time, the flow rate decreases or the motor noise increases. Check whether the filter element is seriously blocked.

When the pressure reaches 0.8Mpa due to the blockage of pollutants, the filter element should be replaced in time. If the oil filter is running, but the oil outlet does not produce oil, check whether the rotation of the motor is correct, whether the seal between the oil tank and the oil pump suction port is reliable, and whether the oil suction port is away from the oil. The face or oil has been sucked up.

超精密滤油机5

The maintenance and maintenance of the 3R ultra-precision oil filter is very important, so it is necessary to do a good job of daily inspection, so that it can play its due role in various fields.

Previous article: If you want to choose a high-quality high-flow water filter, you need to pay attention to the following four points!

Next article:Problems that need to be paid attention to in the use of W-type air filter

Online message

We will contact you within 24 hours

GET GUIDANCE
Copyright © Aite(Henan) environmental protection equipment Co.

icon_online

icon_email

Contact Us

icon_wehtapp Contact Us