What are the problems that need to be paid attention to during the use of the W-type air filter? Let’s take a brief look at it with me below!
1. How to prolong the service life of W-type air filter?
To prolong the life of the filter, the best way is to clean the dust inside. In addition, choosing to use different air filters in different fields is also to be considered. For example, if it is used in a workshop, the corrosion resistance of the filter should be considered, and the air filter should be replaced within the specified time.
2. How to replace the W-type air filter?
When replacing the W-type air filter, it must be carefully operated in accordance with the regulations. After the replacement, a professional should check it, and sometimes the air conditioning system must be adjusted before it can be used.
In addition, the resistance should also be considered when replacing. The level of resistance directly affects the effect of the W-type air filter. The dirtier the air filter, the greater the resistance and the more energy it consumes.
3. How to clean the W-type air filter?
During the cleaning process, remember not to blindly follow the traditional cleaning steps, but to carefully clean according to the professional cleaning method that matches the W-type air filter to be cleaned. Each air filter supplier will have specific cleaning recommendations for their product.
1. Check the color of the filter material on the upper and lower wind sides of the W-type air filter. If the color of the filter material on the air outlet side turns black, prepare to change it.
2. Touch the filter material on the outlet surface of the W-type air filter by hand. If there is a lot of dust on the hand, prepare to replace it.
3. Record the replacement status of the air filter many times, and summarize a good replacement cycle.
4. Under the premise that the air filter has not reached the final resistance, the pressure difference between the clean room and the adjacent room has dropped significantly, it may be that the resistance of the junior high-efficiency filtration is too large, and it is necessary to prepare for replacement.
5. The cleanliness in the clean room does not meet the design requirements, or there is negative pressure. When the junior high-efficiency air filter does not arrive at the replacement time, it may be that the resistance of the W-type air filter is too large, and it is necessary to prepare for replacement.
The above are the issues that need to be paid attention to during the use of the W-type air filter introduced by the editor. I hope it can be helpful to you.
