ZU pressure pipeline filter

Product introduction

1. ZU pressure pipeline filter is installed on the pressure pipeline of the hydraulic system to filter out the mechanical impurities mixed in the hydraulic oil and the colliform, asphaltene and carbonite produced by the chemical changes of the hydraulic oil itself, so as to prevent the valve core stuck, the blockage of orifice gaps and damping holes and the excessive wear of hydraulic components and other failures.

2. The filter has good filtering effect and high precision, but it is difficult to clean after plugging, and the hydraulic oil filter element must be replaced.

3. The filter is provided with a differential pressure signaling device. When the filter element is polluted and blocked until the differential pressure of the inlet and outlet is 0.35MPa, the switch signal will be sent.

4. The filter element is made of glass fiber filter material, which has the advantages of high filtration accuracy, large oil filtration capacity, small original pressure loss, large contaminant capacity, etc. The filtration accuracy is calibrated by absolute filtration accuracy, and the filtration ratio is beta; 3, 5, 10, 20gt; 200, filtration efficiency nge; 99.5%, in line with ISO standards.

Technical parameter

Working pressure: 32Mpa

Connection mode: flange connection

Filter element material: paper

mdash; mdash; transmitter

Installation: Plate type, flip type, inverted pile plate

Filter element type: HX-800*10

Product details