Product
Pressure line filter PLF-C30×20P
Pressure line filter PLF-C30×20P
Pressure line filter PLF-C30×20P
Pressure line filter PLF-C30×20P
Pressure line filter PLF-C30×20P
Pressure line filter PLF-C30×20P

Pressure line filter PLF-C30×20P

Pressure line filter PLF-C30×20P can be installed in different pressure levels of the pressure line, for the ultimate removal of intrusive dirt and chemical impurities

  • Filtration accuracy 1-100μm

Product introduction

Pressure line filter PLF-C30×20P can be installed in different pressure levels of the pressure line, for the ultimate removal of intrusive dirt and chemical impurities. Especially suitable for automatic control systems and servo systems, it can prevent high precision control components and executive components due to pollution and premature wear or stuck, thus reducing failure, prolong the service life of components.

Technical parameter

Working flow: 30L/min

Filtration accuracy: 20um

Connection mode: threaded connection

Filter element type: 0030D020BN/HC

Filter material: glass fiber

Working pressure: 6.3Mpa

The pressure pipeline filter PLF-C30×20P adopts imported glass fiber filter material, which has the advantages of high filtration accuracy, strong oil passing ability, small original pressure loss, large amount of contamination and so on. Its filtration ratio is beta; 3, beta. 5, beta; 10, beta; 20ge; 200, filtration efficiency eta; ge; 99.5%.

The evaluation methods were ISO16889-99 and GB/T18853-2002.

Performance characteristics

1. Compared with the same flow filter, compact structure and small volume.

2. Wide range of use pressure.

3. It is convenient to change the filter element. The user can open the upper cover and replace the filter element according to the installation space, or unscrew the shell (put the oil first) and remove the filter element from below.

4. Easy to install and fix: if the user has difficulty in installing according to the standard flow direction, the four screws on the cover can be removed, and the cover will rotate 180 degrees, so as to change the direction of the medium flow.

5. The filter is provided with a by-pass valve and differential pressure signaling device, double protection function, when the filter element is polluted and blocked until the inlet and outlet differential pressure value is set for the signaling device, the signaling device will send a message, at this time, the filter element must be replaced.

Product details

管路过滤器落地页英文版9

Pressure line filter PLF-C30×20P

email

aiteepcom@163.com

whatsapp

+ 0086-13015535452

Similar ProductsVIEW MORE >

  • PLF.BH-H160*10P high pressure line filter

    PLF.BH-H160*10P high pressure line filter

  • PHA series pressure line filter

    PHA series pressure line filter

  • Pressure line filter PLF-BH-H110x50

    Pressure line filter PLF-BH-H110x50

  • ZUI-H250X20DFP Pressure line filter

    ZUI-H250X20DFP Pressure line filter

  • Online message

    We will contact you within 24 hours

    GET GUIDANCE
    Copyright © Aite(Henan) environmental protection equipment Co.

    icon_online

    icon_email

    Contact Us

    icon_wehtapp Contact Us