Lyc-150B series high-precision hydraulic oil filter

Product introduction

Lyc-150B series high-precision hydraulic oil filter is a high-precision on-line hydraulic oil filter produced by Aite Environmental protection, because the oil filter truck adopts three-stage filtration system, namely, the first stage of crude filtration before the pump and the second stage of fine filtration after the pump, belonging to the three-stage filter oil truck series. The filter truck is based on the two-stage filter, adding the first-stage fine filter to achieve higher filtration accuracy.

Product application

Fresh filtered oil

Fill with new oil and filter

Purify the oil in use

Bypass filtration during operation of hydraulic lubrication system

Remove water from the system oil

Technical parameter

Rated flow: 150L/min

Operating temperature: 5-80°C

Recommended viscosity: 10-160Cst

Rated pressure: 0.6Mpa

First grade coarse filtration accuracy: 100um

Secondary fine filtration accuracy: 10-40um

Three-stage fine filtration accuracy: 3-40um

Weight: 160kg

Dimensions: 710x500x1220

Product performance

1. The oil filter includes a special gear pump driven by a motor, which has the characteristics of low noise, strong self-priming ability and smooth operation.

2. The high-pressure pipeline is equipped with overflow protection device, which can effectively protect the safety of the hydraulic system.

3. Adopt thermal relay protection to prevent motor damage caused by overload.

4. The crude filter at the suction port protects the oil pump and prolongs the service life of the main filter.

5. The pump is equipped with two stages of fine filter, so that the oil quickly reach a high cleanliness.

6. The primary fine filter can filter out large particle impurities, and the secondary fine filter can filter out fine particles or water.

7 fine filter according to the different needs of users, choose different precision, to provide better protection for the system.

8. The pressure gauge is installed on the panel, which continuously indicates the operating condition of the system and the pollution degree of the filter element when working.