Anti-wear hydraulic oil filter truck LYC-A series

Oil filter car introduction

The anti-wear hydraulic oil filter truck LYC-A series is mainly suitable for: low, medium and high pressure hydraulic systems of hydraulic equipment such as engineering, construction, mining, metallurgy, plastic processing, etc， especially suitable for high speed, high pressure and oil cleanliness. The hydraulic system of imported equipment with requirements; it can also be used for the lubrication of other low and medium load gear transmissions, bearings and other industrial machinery. , filter out impurities in the oil, prolong the service life of the oil and reduce the wear of components.

Note on the use of oil filter vehicles

1. Read the instruction manual before use;

2. Start the power supply and check the steering of the oil pump to prevent air from being sucked in;

3. Check the sealing and tightening of the oil filter truck;

4. Do not move the oil filter truck during use;

5. Clean and replace the filter element in time.

technical parameter

Processing capacity: 6-150L/min

Working voltage: AC380V 50HZ

Working pressure: 0.6Mpa

Pressure loss: ≤0.02Mpa

Filtration precision: 3μm

Filter medium: hydraulic oil

Product Details