No. 32 anti-wear hydraulic oil filter truck

Introduction to oil filter truck

No. 32 anti-wear hydraulic oil filter truck is a new type of hydraulic oil filter truck developed by Henan Aite Environmental Protection Equipment Co., Ltd. according to the performance characteristics of No. 32 anti-wear hydraulic oil. No. 32 anti-wear hydraulic oil belongs to industrial lubricating oil. 

Mainly suitable for: engineering, construction, mining, metallurgy, plastic processing and other hydraulic equipment of low, medium and high pressure hydraulic system, especially suitable for high speed, high pressure and oil cleanliness requirements of imported equipment hydraulic system; It can also be used for lubrication of other low and medium load gear transmission devices, bearings and other industrial machinery. The fine oil filter car can be used for filtering oil before filling and regular purification and filtration of oil in the later stage to filter impurities in oil, prolong the service life of oil and reduce component wear.

Pay attention to oil filter truck use

Read the instruction manual before use

Start the power supply to check the steering of the oil pump to prevent air inhalation

Check the seal and tightness of the filter truck

Do not move the oil filter during use

Clean and replace the filter element in time

Parameters of oil filter truck

Processing capacity: 6-150L/min

Filtration system: at least two filtration, three filtration, multistage filtration

Operating voltage: AC380V 50HZ

Working pressure: 0.6Mpa

Pressure loss: less than 0.02Mpa

Filtration accuracy: 3um

Product characteristics