HC2207FKP3H filter element

Product introduction

HC2207FKP3H filter element is mainly used for rolling mill, continuous casting machine hydraulic system filtration and filtration of various lubricating equipment.

Performance index

Medium: general hydraulic oil phosphoric acid hydraulic oil emulsion water - diol

Material: Glass fiber filter paper -BN stainless steel woven mesh -W wood pulp filter paper -P stainless steel sintered mesh -V

Filtration accuracy: 1μ-100μ

Working pressure: 21bar-210bar

Working medium: general hydraulic oil, phosphoric acid hydraulic oil, emulsion, water - glycol

Operating temperature: -30℃ ~ +110℃

Sealing material: fluorine rubber ring butyl rubber

Service life

According to the different raw materials used, the service life of the filter element will be different. With the extension of the use time, the impurities in the water will block the filter element, and the activated carbon filter element will be absorbed and saturated. Therefore, generally speaking, PP filter element needs to be replaced in 3 months, and activated carbon filter element needs to be replaced in 6 months. Because hollow fiber can not be cleaned, it is generally placed in the back end of PP cotton and activated carbon, otherwise it is easy to block, and it needs to be replaced for 1-2 years when used as the end of water purification equipment to remove bacteria.

Matters needing attention

When selecting oil filter element, the following points should be considered:

(1) Filtration accuracy should meet predetermined requirements. 

(2) It can maintain sufficient flow capacity for a long time. 

(3) The filter core has enough strength and is not damaged by hydraulic pressure. 

(4) The filter core has good corrosion resistance and can work at the specified temperature for a long time. 

(5) The filter core is easy to clean or replace.

Product characteristics