Horizontal gas drainer

Product Introduction

Horizontal gas drainer is aimed at the problem that the gas drainer used is easy to leak gas. It provides a kind of gas drainer with no breakdown and no leakage. It can realize zero gas leakage regardless of the gas pressure fluctuation or the water seal is too low (severe water shortage) under the condition of use. Because the horizontal gas drainer is not resistant to breakdown, it is only used near the place where there are regulating pressure and releasing pressure facilities. It is recommended to use in a place less than 20 times the diameter of the gas main.

Principle of Operation

It is mainly to connect the anti-breakdown horizontal gas drainer into the gas conveying pipeline. The condensate water in the gas pipeline enters the high pressure chamber of the drainer through the drain pipe, and then enters the low pressure chamber of the drainer through the connected pipe of the high and low pressure chamber on the partition board. The condensate water is collected and automatically discharged from the gas pipeline through the water seal, so as to ensure the normal operation of the equipment. When the abnormally low water level of the drainer caused by the pressure fluctuation of the gas pipe network or other reasons is broken down by the gas, under the action of the gas impact, the anti-leakage device is triggered to close the overflow port, prevent the gas from leaking out, and ensure the normal operation of the equipment.

Form of structure

1. The horizontal gas drainer consists of a horizontal pipe and two vertical short pipes to form a "U" shaped water seal. The two ends of the horizontal pipe are blocked with steel plates.

2. Horizontal gas drainer uses the height of water seal to overcome the gas pressure, so as to seal the gas and cut off the gas to discharge condensate water. This product is located on the overhead gas pipe to eliminate the condensate water in the gas pipe.

Product Details