Large flow automatic self-cleaning filter is composed of stainless steel filter element in a tank body, and its main components are composed of filter element and sewage suction device.
Large flow automatic self-cleaning filter is composed of stainless steel filter element in a tank body, and its main components are composed of filter element and sewage suction device. During filtration, sewage enters from the lower part of the filter and distributes to each filter element. The sewage is filtered from the inside to the outside of the filter element. Solids in sewage are trapped by the filter screen; An electric motor drives the cleaning mechanism to rotate and move up and down the sucking scanner.
The sucking scanner is connected with a blowdown valve. When the blowdown valve is opened, the pressure difference between the internal water pressure of the filter and the external atmosphere makes each suction nozzle produce strong suction. The cleaning process takes about 35-60 seconds. The screen of the filter is cleaned in turn. In the whole reverse cleaning process, the system does not break the flow.
Installation mode: vertical installation
Flow of a single machine: 2000-4000m3/h.
Low working pressure: 0.25MPa
Maximum working pressure: 1.0MPa, 1.6Mpa
Operating temperature: 70℃
Filtration accuracy: 25-500 microns
Filter element: stainless steel braided mesh
Filter area: 20~50000cm2
Control mode: pressure difference, time and manual
Cleaning time: 50-140 seconds
Cleaning mechanism speed: 14-20rpm
Cleaning method: Scanning and sucking cleaning.
Cleaning pressure loss: 0.01-0.08MPa
Filter body: carbon steel, epoxy resin coating according to the requirements available stainless steel 316, 304
Screen: stainless steel 316L wedge filter element; Stainless Steel 316L braided steel wire
Cleaning mechanism (internal) : Stainless Steel 304,316L, POM
Blowdown valve: cast iron, epoxy coating; 304316 L
Seal ring: synthetic rubber, teflon
Control and distribution
Control voltage: 24V according to the need to choose 10 volts or 24 volts DC) motor power: 0.35-1.0 horsepower, 50Hz
Rated operating voltage: 3 phases, 220/380V (as required)
Current: 1.5-2A
Large flow automatic self-cleaning filter
Similar ProductsVIEW MORE >