Automatic Backwash filter ATZQ-100-150

Product introduction

Automatic backwash filter ATZQ-100-150 is composed of a cylinder, stainless steel filter, blowdown part, transmission device and electrical control part. Automatic backwash filter ATZQ-100-150 can filter industrial wastewater, circulating water filtration, metallurgy industry continuous casting water, blast furnace water, etc.

Technical parameter

1. Material: stainless steel, carbon steel

2. Filter net: 304 stainless steel

3. Filter form: straight through type

4. Backwash time: 15 seconds

5. Filtration accuracy: 100μm

6. Operating temperature: 80°C

7. Backwash pressure difference: 0.5Kg/c㎡

Working principle

Step 1 Filter

The fluid flows in from the inlet and flows out from the small gaps in the wedge cartridge in the filter. The impurity particles are easy to be intercepted. When the impurity particles accumulate on the surface of the filter screen, the pressure difference will be produced.

Step 2: Wash

When the inlet/outlet pressure difference reaches 0.5Kg/c square meters (adjustable), the filter backwash system will start to work automatically. Operation by the differential pressure controller set on the body, the electric blowdown valve and a rotating stainless steel cleaning brush driven by the motor, impurities particles are easy to be brushed down by the steel brush, and then discharged by the blowdown valve, backwash time lasts about 15 seconds (adjustable), backwash does not break the flow.

Scope of application

Automatic backwash filter ATZQ-100-150 has a wide range of applications in various industries: cyclic or non-cyclic cooling

Water system, heat exchange system, air conditioning system, central heating system, hot water boiler system, etc., are used to protect cooling

Equipment, heat exchange device, air conditioner, boiler, etc. The equipment is used in construction, chemical industry, electric power, metallurgy, rubber, paper making, textile, coal, food and other industries.

Product details