When the water enters the filter cylinder from the horizontal self-cleaning filter inlet, the impurities are blocked in the inner wall of the filter cylinder, the filtered water flows out from the outlet, when the impurities accumulate on the inner wall of the filter cylinder, the pressure difference between the inlet and outlet of the self-cleaning filter reaches a preset value or reaches the cleaning time or manually prefabricated, the filter will start the self-cleaning process
When the water enters the filter cylinder from the horizontal self-cleaning filter inlet, the impurities are blocked in the inner wall of the filter cylinder, the filtered water flows out from the outlet, when the impurities accumulate on the inner wall of the filter cylinder, the pressure difference between the inlet and outlet of the self-cleaning filter reaches a preset value or reaches the cleaning time or manually prefabricated, the filter will start the self-cleaning process, the whole self-cleaning process contains two steps: Open the automatic blowdown valve located on the self-cleaning filter; The motor drives the cleaning system in the filter screen, and the impurities blocked by the filter screen are discharged from the blowdown valve. The system does not interrupt the flow when cleaning, and the whole operation process of the self-cleaning filter is controlled by an intelligent control box randomly equipped. Control mode optional pressure difference, time, manual and PLC control.
Stainless steel self-cleaning filter to overcome the traditional filtration products of small amount of pollution, easy to be blocked by dirt, the filter part needs to be removed and cleaned and can not monitor the filter status and many other shortcomings, with the raw water filtration and automatic filter element automatic cleaning sewage function, and cleaning sewage system uninterrupted water supply, can monitor the filter working state, a high degree of automation. Electric drive, stainless steel brush cleaning, system pressure capacity is strong; High precision differential pressure control design, time control, manual control cleaning; Steel brush disassembly, installation, maintenance is easy to operate; Adjacent two cleaning, the motor is rotating alternately, so that the stainless steel brush life is longer; Equipped with motor overload protection, can effectively protect the motor.
Treatment water: 5~2350m3/h
Working pressure: 1.0Mpa, 1.6Mpa, 2.5Mpa
Operating water temperature: ≤95℃
Filtration accuracy range: 100~3000μm
Cleaning time: 10~9999 seconds (optional range)
Control mode: differential pressure, time and manual
Electric control mode: AC three-phase 380V/50Hz
Control interface: LCD display, button
Screen type: wedge-shaped strip screen
Shell material: Q235B, 304, 316, 316L
Screen material: 304, 316, 316L
Cleaning parts material: 304, 316, 316L
Note: The above is the general configuration, if there are special requirements can be customized
Aite Environmental stainless steel horizontal self cleaning filter
Similar ProductsVIEW MORE >
Export01@aiteeps.com
+0086-13015535452
