The automatic self-cleaning filter is a kind of filter that directly intercepts impurities in the water, removes suspended solids and particulate matter in the water body, reduces turbidity, purifies water quality, and reduces system fouling, algae, rust, etc., to purify water quality and protect other systems. A device that works properly. The water enters the self-cleaning filter body from the water inlet.
The automatic self-cleaning filter is a kind of filter that directly intercepts impurities in the water, removes suspended solids and particulate matter in the water body, reduces turbidity, purifies water quality, and reduces system fouling, algae, rust, etc., to purify water quality and protect other systems. A device that works properly. The water enters the self-cleaning filter body from the water inlet. Due to the intelligent (PLC, PAC) design, the system can automatically identify the degree of impurity deposition and automatically discharge the sewage by signalling the sewage valve.
When the pressure difference between the inlet and outlet of the filter reaches the preset value, the filter will start the self-cleaning process. The whole self-cleaning process includes two steps: opening the drain valve on the upper end cover of the filter; The stainless steel brush is turned, and the impurities captured by the filter screen are thus brushed down by the steel brush and discharged from the drain valve. The entire cleaning process takes about 15-60 seconds, the system is constantly flowing during cleaning, and the entire operation of the filter is controlled by a control box equipped with it.
1. The bottom of the automatic self-cleaning filter is equipped with a centrifugal disc, which can make the water flow generate vortex and form a centrifugal force, which can keep solid particles away from the filter disc and gather on the top of the filter, reducing the frequency of filter cleaning.
2. During backwashing, the four water jet columns in the middle of the filter element spray water tangentially, hitting the disc, causing the disc to rotate, so that the dirt on the disc can be separated from the disc by centrifugal force, which is convenient for cleaning and reduces the cleaning time.
3. The shell is made of ABS or nylon engineering plastics, which is resistant to acid and alkali corrosion and has strong impact resistance.
4. The diameter of the disc is larger, and the same number of discs corresponds to a larger filtering area of the filter, thereby increasing the filtering capacity.
5. Equipped with motor overload protection to protect the motor.
6. It has the characteristics of uninterrupted water supply and no need for bypass when cleaning and discharging sewage, and the cleaning time is short, and the water consumption of sewage is less, which does not exceed 1% of the total flow.
7. Strong maintainability, easy installation and disassembly.
Fully automatic self-cleaning filter
Similar ProductsVIEW MORE >
Export01@aiteeps.com
+0086-13015535452
