Automatic flushing sewage filter

Product introduction

Automatic flushing sewage filter is a kind of filter that directly intercepts impurities in water, removes suspended solids and particulate matter in water body, reduces turbidity, purifies water quality, reduces system fouling, algae, rust, etc，to purify water quality and protect other equipment in the system In normal working equipment, water enters the self-cleaning filter body from the water inlet. Due to the intelligent (PLC, PAC) design, the system can automatically identify the degree of impurity deposition, and automatically discharge the sewage to the sewage valve signal.

Working principle

The water enters the filter from the water inlet, first passes through the coarse filter element to filter out larger particles of impurities, and then reaches the fine filter screen. After filtering out the fine particles of impurities through the fine filter screen, the clean water is discharged from the water outlet.

Precautions

1. The self-cleaning filter should be used with the rated voltage/frequency indicated on the nameplate.

2. The filter should be maintained at regular intervals. Before cleaning and maintenance, disconnect the power supply of the self-cleaning filter.

3. Please make sure that the cord plug does not get wet when cleaning, otherwise dry the plug before reconnecting the power.

4. Do not unplug the power cord with wet hands.

5. If the filter is damaged, especially when the power cord is damaged, it cannot be used.

6. Please make sure that the self-cleaning filter is working in the correct water level, the filter cannot be used without water.

7. Do not disassemble or repair it without permission to avoid danger or damage to the body.

Product Details