Product
Suck-scanning self-cleaning filter
Suck-scanning self-cleaning filter
Suck-scanning self-cleaning filter
Suck-scanning self-cleaning filter
Suck-scanning self-cleaning filter
Suck-scanning self-cleaning filter

Suck-scanning self-cleaning filter

The Suck-scanning self-cleaning filter contains a multi-layer all-stainless steel filter with a high filtration accuracy of up to 10 microns; it is a combination of material strength, filtration capacity and cleaning efficiency by combining the mesh weaving method and structure pattern.

  • filter medium: water
  • Accuracy: 10-480μm

Product description

The Suck-scanning self-cleaning filter contains a multi-layer all-stainless steel filter with a high filtration accuracy of up to 10 microns; it is a combination of material strength, filtration capacity and cleaning efficiency by combining the mesh weaving method and structure pattern. in order to achieve a good filtering result. The Sucking Scan technology consumes less than 1% of the total water volume. It is the relatively low discharge water consumption among the Aite environmental protection self-cleaning filters.

Cleaning process

When the pressure difference inside and outside the filter screen reaches the preset value or the timing cleaning switch reaches the set time, the system starts the self-cleaning process.

The whole cleaning process is completed by a sucking scanner, which performs a spiral scanning motion to suck down the impurities on the inner surface of the filter screen and discharge it through a drain valve. The scanner is driven by a bidirectional rotating electric motor through a screw rod. drive.

The opening of the blowdown valve is controlled by a two-position, three-way solenoid valve. The whole blowdown process lasts for about 35 seconds, and the system flows continuously during this process.

Filtration performance

Uninterrupted water supply: The amount of water during cleaning is small, which is 1% of the water output of the filter. The flushing time is 15 to 60 seconds, and the entire system is supplied with uninterrupted water.

High filtration precision: The filtration precision can reach 20 microns, and there are filters of various precisions for you to choose from.

Large filtration area: The filtration area of the standard filter screen is 7 to 40 times that of the inlet area.

Work process

The fine filter is retained and the corresponding pressure loss is formed. The coarse filter is designed to protect the cleaning mechanism from damage by large particles of impurities, and it does not function as a filter.

Product Details

Suck-scanning self-cleaning filter

email

aiteepcom@163.com

whatsapp

+ 0086-13015535452

Similar ProductsVIEW MORE >

  • Horizontal pipe self-cleaning filter

    Horizontal pipe self-cleaning filter

  • Self-cleaning mechanical filter

    Self-cleaning mechanical filter

  • Multi-column self-cleaning filter

    Multi-column self-cleaning filter

  • Aite environmental protection vertical hydraulic drive self-cleaning filter

    Aite environmental protection vertical hydraulic drive self-cleaning filter

  • Online message

    We will contact you within 24 hours

    GET GUIDANCE
    Copyright © Aite(Henan) environmental protection equipment Co.

    icon_online

    icon_email

    Contact Us

    icon_wehtapp Contact Us