Air compressor air filter CR102120

Product introduction

Air compressor air filter CR102120 industrial dust removal filter element can filter the dust in compressed air, high dust efficiency, simple installation, use, easy maintenance and so on. Material imported from the United States composite long fiber spunbonded polyester non-woven fabric production. It has the advantages of high filtration precision, good waterproof and oil proof performance, small resistance, large handling air volume, good stiffness, not easy to deformation, washable, long service life, etc. Filter materials: filter paper, high efficiency felt using high quality wood pulp fiber filter paper, high strength polyester fiber non-woven fabrics and other filter materials suitable for various industrial production dust removal system needs. Applied to: painting equipment, industrial dust removal, central air conditioning duct cleaning, powder spraying, sand blasting operation, pigment industry, wood processing filtration, etc. Accuracy up to 0.3 micron! Filtration efficiency 99.96%! Imported long fiber polyester filter material, fiber interleaved, uniform distribution. Good wear resistance, better than the traditional filter material can withstand the pulse back blowing airflow, filter material stiffness is good, and can be repeatedly cleaned. End cover, center frame are electric galvanized parts, do not rust.

Technical parameter

Air compressor air filter CR102120 industrial dust removal filter element can filter the dust in compressed air, high dust efficiency, simple installation, use, easy maintenance and so on. It has the advantages of high filtration precision, good waterproof and oil proof performance, small resistance, large handling air volume, not easy to deformation, washable, long service life and so on.

Performance characteristics

1. The operating temperature range of dust removal filter element is wide: -10℃ to 100℃

2. Wide range of filtration accuracy: 1um-100um

3. The filter ratio can reach 200

4. High filtration efficiency can reach 99.5%

Working principle

1. The lubricating oil surface in the oil and gas separator barrel should be controlled in the specified position, usually 1/2~2/3 of the oil speculum.

2. The secondary return tubing and check valve shall be kept unobstructed and in the specified position.

3. Adjust the exhaust pressure to the specified value.

4. The operating temperature and pressure of the compressor are normal.

Product details