Vacuum oil filter car_Aite(Henan) environmental protection equipment Co.

Functional use

ZLYC-100 High efficiency vacuum oil filter is an oil filter used for oil dehydration. Using the same temperature water and oil different saturated steam pressure, using the method of vacuuming, because the saturated steam pressure of oil is lower than the steam of water, so in the oil liquid surface pressure is reduced to the saturated steam pressure of water below, the water in the oil will occur severe gasification, and in the form of steam overflow from the oil. In the process of work, through the suction of the vacuum, the oil from the top into the vacuum tank, and through the nozzle spray down, the water in the oil in the vacuum chamber gasification and pumped out by the vacuum pump, the removal of water from the bottom of the oil. There is a lipophilic material in the vacuum chamber, so that the spray down the oil is dispersed on the surface of the filling material in the form of a film to increase the atmospheric liquid two-phase interface area, and prolong the residence time of the oil in the gas phase space.

Performance characteristics

1.Automatic control, manual debugging function.

2.Stable operation, the use of fluid sensor, with protection or monitoring device, motor overheating, overload, lack of phase protection device, oil pump air defense to protection device, heater dry burning device, vacuum pump oil external circulation supplement tank, infrared automatic water defoamer, liquid level automatic control device, overpressure stop protection device.

3. Vacuum dehydration is applied in the dewatering system, and the manufacturing process is full. One cycle dehydration removes 60% of the water content in the oil, removes free gas and 85% of the dissolved gas.

4.Equipped with air cooled cooler, so that the equipment inside and outside the formation of large temperature difference environment, further improve the water separation efficiency.