The coalescating dewatering oil filter is divided into five stages, the oil first passes through the oil absorption filter, the pre-filter, the mixed oil filters out part of the large particle impurities, into the coalescating separation tank, the oil first passes through the coalescating filter, the coalescating filter element is made of hydrophilic materials, because the oil and water through the filter layer speed is different, the tiny water droplets adsorbed on the surface of the filter layer to gather into water droplets, by gravity settlement,
The coalescating dewatering oil filter is divided into five stages, the oil first passes through the oil absorption filter, the pre-filter, the mixed oil filters out part of the large particle impurities, into the coalescating separation tank, the oil first passes through the coalescating filter, the coalescating filter element is made of hydrophilic materials, because the oil and water through the filter layer speed is different, the tiny water droplets adsorbed on the surface of the filter layer to gather into water droplets, by gravity settlement, Initially separated from the oil, the oil and a small part of small molecules of water continue to flow through the separation filter, the separation filter is made of special hydrophobic materials, the oil can pass through the filter layer, and the water is blocked outside the filter layer, the water further settlement, converge to the liquid accumulation tank; Through the separation filter, the oil with moisture removed is further removed through the secondary fine filtration filter element, and finally the clean oil after dehydration and impurity removal is formed for the use of subsequent equipment.
When the coalescing dehydrating oil filter works, the mixed liquid flows into the separator and first enters the coalescing filter element and is captured by the fine fibers inside the coalescing filter. These micron-level fibers form a winding channel to the air flow, forcing the solid particles and liquid droplets to be captured by the fine fibers under the action of three filtration mechanisms, namely inertial collision, diffusion interception and direct interception. Surface tension causes small droplets to coalesse into larger ones, which settle to the bottom of the container due to gravity. And then into the separation of the filter element, the separation of the filter element is made of specially treated stainless steel mesh, the surface by hydrophobic, oil phobic treatment, when the mixture from the outside to the inside through the separation of the filter element, small water beads are intercepted in the outside of the filter element, only let the oil through, so as to further separate the water.
Set precision filtration, dehydration two functions in one.
All the oil-water emulsification structure in the oil was broken, and the free water in the oil was removed. After treatment, the water content was less than 100PPM.
It has the advantages of high filtration accuracy, large contaminant capacity, long service life of filter element and high dewatering efficiency.
Inverter, hydraulic transducer, temperature sensor, vacuum sensor and other automatic control devices, to ensure the best operation of the equipment.
Model: LYC-J series
Flow: 25L/min-400L/min
Rated pressure: 0.6MPa
Water content after filtration: ≤100ppm
Coarse filtration accuracy: 100μm
1 level fine filtration accuracy: 10/20
2 stage fine filtration accuracy: 3/5
Recommended viscosity: 10-120cst
Motor power: 0.75-13KW
LYC-J coalescing dehydrating oil filter
Similar ProductsVIEW MORE >
Export01@aiteeps.com
+0086-13015535452
