For traditional filtration and separation equipment, it is particularly difficult to separate another kind of liquid from another kind of liquid mixed together. The polymerization separation type oil filter developed by Aite Environmental Protection Company can remove particles and impurities in the oil and emulsified water, free water, without damaging the quality of the original product.
For traditional filtration and separation equipment, it is particularly difficult to separate another kind of liquid from another kind of liquid mixed together. The polymerization separation type oil filter developed by Aite Environmental Protection Company can remove particles and impurities in the oil and emulsified water, free water, without damaging the quality of the original product. For the oil containing a lot of water, the separation effect is particularly significant, the separation speed is several times to dozens of times the traditional speed.
Rated flow: 50L/min
Rated pressure: 0.6MPa
Operating temperature: 25-80℃
Initial pressure loss: ≤0.1MPa
Filtration accuracy before pump: 100μm
Primary fine filtration accuracy: 10, 20, 40μm
Secondary fine filtration accuracy: 3, 5, 10μm
Voltage V: AC 380V three-phase
Motor power: 1.1kw
1. Set two functions of precision filtration dehydration as one, the application of advanced "coalescence separation" technology for dehydration, dehydration efficiency is high, strong ability.
2. Using imported filter material as filter medium, large filter area design, can filter out very fine particles of impurities, so that oil products to achieve a high degree of cleanliness.
3. The coalescence system is composed of a set of coalescence filter element, which adopts a polar molecular structure. After passing through the filter element, the free water and emulsified water in the oil are coalesced into large water droplets, which are then settled into the water storage tank by gravity.
4. The separation filter element of the separation system is made of special hydrophobic material. When the oil passes through the filter element, the water droplets are blocked on the outer surface of the filter element and coalesce with each other until they settle into the water storage tank due to the action of gravity.
5. The separated water is stored in the water storage tank. When the interface height reaches the set value, open the valve to discharge the water until it falls to the lower liquid level, close the valve and stop the drainage.
1. Purification of turbine oil and transformer oil;
2. Water removal and impurity removal filtration of hydraulic lubrication system oil;
3. Access the hydraulic lubrication system to improve the cleanliness of the system.
Coalescing separation oil filter LYC-50J
Similar ProductsVIEW MORE >